x axis

3i is just going to go along the x axis but by distance of three instead of one.

3i就是向x轴方向平移，但是平移3个单位，而不是一个。

Locate the segment of the X axis for the staff size ( typically just the development team).

根据成员数量确定在X轴上的部分（通常的只是开发组）。

One of them involves computing a line integral from the origin to a point in the plane by going first along the x axis, then vertically.

一种是从原点开始，沿x轴水平前进，然后沿y轴竖直前进，求出相应的线积分。

Well, the object started at a position here on this x axis and then it went up, reached the highest point here so I'll make a drawing for you here.

物体从x轴此处，开始其运动，向上后在此，达到最高点，我作个图。

X axis and Y axis adopt ball spiral rods with excellent precisions and low friction factors.

X.Y轴采用滚珠螺杆传动精度佳,摩擦系数小.

Open the valve and check X axis deviation and operation range of the valve blades.

将阀门打开同时检查X轴方向偏差及阀体叶片的操作范围。

Realizes X axis and the Z axis two coordinates linkage as well as to the cutting tool automatic selection.

实现X轴和Z轴的两坐标联动以及对刀具的自动选取。

Because the area is fixed, you can always find the span ( length) of the X axis and the span ( height) of the Y axis.

因为该区域是固定的，所以您总是可以找到X坐标轴的跨度（长度）和Y坐标轴的跨度（高度）。

And the other one, theta, is the angle counterclockwise from the x axis.

另外一个是θ，是从x轴偏转过去的。

This subject is about thermal deformation error detection and compensation of an YKX3132G six axes CNC gear-hobber machine's worktable in X axis direction.

本课题针对在KX3132G型六轴数控滚齿机床加工过程中，工作台热致变形产生的X轴方向上的误差进行测量与补偿。

So, the Greenwich Meridian would be here, now, the one on the x axis.

因此本初子午线应该在这里，也就是x轴。

If you move parallel to the x axis, nothing happens.

如果你平行于x轴地移动，什么都不会改变。

Then we turn the matrix into plot with the software named MATLAB 6.5 edition and get two movement trace one on X axis and the other on Y axis.

使用MATLAB6.5版将矩阵转换为曲线，得到X轴及Y轴运动轨迹各一。

The experiments show that the average crosswise velocity of the metal atomic vapor increases linearly along the x axis and the crosswise velocity distribution approximately obeys the Maxwell distribution law.

通过实验证实了在线源蒸发的情况下，原子蒸气横向平均速度随横轴线性增加，横向速度分布近似服从Maxwell分布。

Displacement of X axis: The maximum lateral displacements were at the first molar of basal bone,-20.783μ m.

X轴方向的位移：横向最大位移在第一磨牙基骨，为-20.783μm；

X axis and Y axis electric moving stages are driven to track object based on its position which is calculated by improved 3 frame difference algorithm.

通过改进的三帧差分法计算运动目标的位置，控制X、Y轴电动位移台跟踪目标。

The X axis shows the service performance period for which the data is generated.

X轴显示生成服务性能数据的时间段。

It uses a center origin and currently has a popup animation that rotates on the X axis starting at 180 degrees, going to 360, then resetting.

它使用一个中心起点和当前的弹出动画，它可以在X轴坐标上180度至360度旋转，然后重置。

You could easily plot these adventurous innovators on a graph, with the X axis showing their skill and the Y axis their financial means.

你可以把这些具有冒险精神的发明家们用一条曲线描述出来，X轴表示他们的技术能力，Y轴表示他们搞到的资金。

Lower esophageal target volume in the Y axis, X axis, Z axis movement and lesion size.

下段食管癌靶区在Y轴、X轴、Z轴方向的移动与病变大小有关。

Let this be the Y axis and this the X axis, and here at zero I have a mass m.

这是Y轴，这是X轴，质量m放在原点。

It's going to hug the x axis until it gets a very, very close.

它将会紧挨x轴，直到很近很近。

So, the x axis is interatomic spacing, and the y axis is energy.

所以x轴是原子间距，而y轴是能量值。

But now if I want to keep the same x axis here, I can look at xA here, going from zero to one.

但是现在我想保持x轴，考察xA从0变到1。

It will rotate as it moves along the x axis.

它可以一边沿着x轴移动，一边旋转。

The spectrum of arrival angle in X axis same as the spectrum in Y axis indicated obviously that the turbulence in the tank was isotropic feature.

到达角起伏在水平和垂直方向上的谱完全一致表明了湍流池湍流的各向同性特征。

So, I have this plane that actually contains the x axis and slopes downwards with slope one. It's kind of hard to draw.

此平面包含x轴，和一条斜率为1的直线，这个图像有些难画。

This work is then referenced and sequenced in a process along the x axis representing the timeline.

然后这些工作被引用并在过程中被排序，表现在时间轴x轴上。

We have a point P going P in three-dimensional space and here we have the entire behavior of the object as it moves its projection along the x axis.

三维空间中，有一点，而这些，用以描述，它在x轴上整个运动的投影。

And, if you go along the x axis, then you get towards negative values.

而如果你沿着x轴前进，那么你走向了负值。